ZeverCom

Introduction

The ZeverCom is a cost effective monitoring and control solution designed for the residential home owner. It is the gateway to our ZeverCloud monitoring portal which lets you view the real time PV system performance and creates regular performance reports which can be sent via email to the home owner. The graphical user interface makes configuration and system commissioning simple whilst allowing the possibility of grid feed-in management such as power limitation.

Features

  • System monitoring via the ZeverCloud Portal
  • Communicates with up to 5 inverters
  • Standard RS485 interface
  • Remote monitoring via Ethernet or WiFi
  • Power limit setting
  • Integrated multi-function switch/relay
  • Earth fault alarm conformity with AS/NZS 5033
  • Zero export control conformity with Australia Ergon&Energex guideline
  • 5 days of storage for a PV plant with 5 inverters
ZeverCom

Electrical data

Power requirementsDC 7.5 V to 12 V / 300mA
Max. power consumption1.5 W
Power supplypower adapter 

User interface

Digital input-
Ethernet 10/100 Mbit/s 
WiFi (2.4GHz, 802.11 b/g/n, WEP,WPA,WPA2,PSK)-
RS485● / x 2
Analog input on RJ45● (Australia DRM)
LCD16 x 2 characters
LEDx 4

Communication range

RS4851000 m
Ethernet100 m

Mechanical data

Dimensions (W / H / D)138 / 31 / 87.5 mm
Weight230 g
InstallationWall, indoor

Environmental conditions

Operation-10℃ to +60℃ / +14℉ to +140℉
Storage and shipment-30℃ to +80℃ / -22℉ to +176℉
Relative humidity (non-condensing)5% to 95%
Protection classIP20

General data

ZeverCloud support
Integrated webserver
Multi-language supportEN, DE
Certificates and approvalsCE

Feature

Number of connected invertersMax. 5
Inverter fault alarm output
Demand Response Mode (AS4777)
Active power limit setting
Zero-export control 1)
Storage5 days
Firmware updateEthernet


● standard
○ optional
- not available

1) With zeversolar approved smart meters

 

As of December, 2018 / Technical data is subject to revisions.

Electrical data

Power requirementsDC 7.5 V to 12 V / 300 mA
Max. power consumption2.5 W
Power supplypower adapter

User interface

Digital input-
Ethernet 10/100 Mbit/s 
WiFi (2.4GHz, 802.11 b/g/n, WEP,WPA,WPA2,PSK)
RS485● / x 2
Analog input on RJ45● (Australia DRM)
Micro USB
LCD16 x 2 characters
LEDx 4

Communication range

RS4851000 m
Ethernet100 m

Mechanical data

Dimensions (W / H / D)138 / 31 / 87.5 mm
Weight260 g
InstallationWall, indoor

Environmental conditions

Operation-10℃ to +60℃ / +14℉ to +140℉
Storage and shipment-30℃ to +80℃ / -22℉ to +176℉
Relative humidity (non-condensing)5% to 95%
Protection classIP20

General data

Solarcloud support
Integrated webserver
Multi-language supportEN, DE
Certificates and approvalsCE

Feature

Number of connected invertersMax. 5
Inverter fault alarm output
Demand Response Mode (AS4777)
Active power limit setting
Zero-export control 1)
Storage5 days
Firmware updateEthernet / WiFi


● standard
○ optional
- not available

1) With zeversolar approved smart meters

 

As of December, 2018 / Technical data is subject to revisions.